Industry Solution / Oil & Gas Radio Procurement

Oil & Gas Radio Procurement — Hazardous-Area Documentation, DMR and TETRA

Compare candidate radio packages against the plant classification, existing network and exact terminal and accessory documentation.

Values come from the linked product records and their manufacturer documents; unpublished fields are left blank, not inferred.

Why Standard Radios Fail Here

01

Equipment approval

Request the certificate for the exact radio, battery and accessory combination required by the site.

02

Coastal and process environments

Confirm environmental requirements for the actual operating location and the offered model.

03

Emergency communication

Define call priority, alarm handling and the dispatch response before configuring the fleet.

04

Network compatibility

Confirm the installed DMR or TETRA infrastructure and the terminal features approved on that network.

Published Features and Documentation to Confirm

SpecificationDP4401ExDP4801 ExMTP6550MTP8550Ex
Radio technologyMOTOTRBO TDMA (ETSI TS 102 361), analogue capableETSI TS 102 361-1, -2, -3; DMR Tier II and DMR Tier IIITETRA (TMO/DMO, DMO repeater type 1A)
Environmental featuresIP67 (IEC 60529); IP64 per ATEX/IECEx certificationIP67 (IEC 60529)IP64 / IP65 / IP66 / IP67 (IEC 60079-0:2017 and IEC 60529)

Confirm the exact model, regional version and the approval that model actually carries before quoting. A blank cell means the record publishes no value.

Site Types, Hazard Classification and Approvals

Where these terminals are deployed, how the area is classified, and which approval the destination regulator asks for.

Typical sites

  • Oil refinery
  • Petrochemical plant
  • Offshore platform
  • Oil rig
  • LNG plant
  • LPG terminal
  • Gas station / petrol station
  • Pipeline and tank farm
  • Chemical plant
  • Fertilizer plant

Hazard classification

  • Explosive atmosphere
  • Flammable gas and vapour
  • Combustible dust
  • Hazardous area — Zone 1 / Zone 2
  • Division 1 / Division 2
  • Class I Div 1 (C1D1)
  • Group A-G
  • T4 temperature class
  • Dust ignition proof

Approvals by destination

  • ATEX — EU
    Zone 1 or Zone 2 category, decided by your area classification study rather than by the radio.
  • IECEx — International
    Often the only mark a multi-country project will accept.
  • FM Approved / UL913 — United States
    Class I Div 1 is the North American equivalent of Zone 1.
  • SASO — Saudi Arabia
    Required for import, with a certificate of conformity per shipment.
  • EAC — EAEU
    Required for customs clearance.

Documentation is supplied for the model ordered; a generic certificate is never substituted. If your tender names a scheme not listed here, send the destination and the standard and we will confirm what applies.

Deployment Planning Checklist

Separate process-area users, control-room users and maintenance crews by their actual network and equipment requirements. Review the supporting certificates and accessory lists, then test coverage and emergency procedures on the installed network.

Deep Technical FAQ

Can I select a hazardous-area radio from the model name alone?

No. Confirm the exact model, certificate scope and approved battery and accessory combination against the site classification. Do not infer an approval from another radio in the same family.

Does a TETRA listing prove that it is approved for offshore hazardous areas?

No. TETRA describes a radio technology, not an explosion-protection approval. Request the certificate and environmental documentation for the exact offered configuration.

How should batteries and audio accessories be selected?

Request the approved accessory list for the terminal configuration. Check the battery and audio accessory as part of the documented equipment package.

What should be included in a plant radio quotation?

Include the site classification, required certificates, installed network, licensed channels, emergency workflow, destination and acceptance criteria.

Need the network planned, not just the radios?

For a project in this sector we also work out the radio and repeater quantities, the coverage layout and the full BOM, then supply it pre-programmed.

Build Your Oil & Gas Radio Procurement Fleet

Documentation support · Free programming · DDP to approved markets

Get a Quote